Ca-Value - Juniper JUNOS OS 10.3 - SOFTWARE Manual

ca-value

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Example: Setting Up VoIP with 802.1X and LLDP-MED on an EX Series Switch on
page 2580
Configuring LLDP-MED (CLI Procedure) on page 2624
ca-value value;
[edit protocols lldp-med interface (all | interface-name ) location civic-based ca-type number]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For Link Layer Discovery Protocol–Media Endpoint Device (LLDP-MED), configure location
information, such as street address and city, that is indexed by the ca-type code. This
information is advertised from the switch to the MED and is used during emergency calls
to identify the location of the MED.
Disabled.
value—Specify a value that correlates to the
suggested values.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show lldp on page 2769
Example: Setting Up VoIP with 802.1X and LLDP-MED on an EX Series Switch on
page 2580
Configuring LLDP-MED (CLI Procedure) on page 2624
Chapter 85: Configuration Statements for Access Control
. See ca-type for a list of codes and
ca-type
2665