Chapter 91 Configuration Statements For Rate Limiting; Edit Ethernet-Switching-Options] Configuration Statement Hierarchy - Juniper JUNOS OS 10.3 - SOFTWARE Manual

CHAPTER 91
Configuration Statements for Rate
Limiting

[edit ethernet-switching-options] Configuration Statement Hierarchy

Copyright © 2010, Juniper Networks, Inc.
[edit ethernet-switching-options] Configuration Statement Hierarchy on page 2799
ethernet-switching-options {
analyzer {
name {
loss-priority priority;
ratio number;
input {
ingress {
interface (all | interface-name);
vlan (vlan-id | vlan-name);
}
egress {
interface (all | interface-name);
}
output {
interface interface-name;
vlan (vlan-id | vlan-name);
}
}
}
bpdu-block {
disable-timeout timeout;
interface (all | [interface-name]);
}
dot1q-tunneling {
ether-type (0x8100 | 0x88a8 | 0x9100);
}
interfaces interface-name {
no-mac-learning;
}
mac-notification {
notification-interval seconds;
}
mac-table-aging-time seconds;
port-error-disable {
disable-timeout timeout;
2799