Family - Juniper JUNOS OS 10.3 - SOFTWARE Manual

family

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
family family-name {
filter filter-name {
interface-specific;
term term-name {
from {
match-conditions;
}
then {
action;
action-modifiers;
}
}
}
}
[edit firewall]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Option introduced in Junos OS Release 9.5 for EX Series switches.
interface-specific
Configure a firewall filter for IP version 4 or IP version 6.
—Version or type of addressing protocol:
family-name
any —Filter packets based on protocol-independent match conditions.
—Filter Layer 2 (Ethernet) packets and Layer 3 (IP) packets.
ethernet-switching
inet —Filter IPv4 packets.
—Filter IPv6 packets.
inet6
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Firewall Filter Match Conditions and Actions for EX Series Switches on page 3009
Example: Configuring Firewall Filters for Port, VLAN, and Router Traffic on EX Series
Switches on page 3039
Configuring Firewall Filters (CLI Procedure) on page 3063
Configuring Firewall Filters (J-Web Procedure) on page 3069
Firewall Filters for EX Series Switches Overview on page 3001
Chapter 105: Configuration Statements for Firewall Filters
3103