Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2661

Table 336: Components of the MAC RADIUS Authentication Configuration Topology
Property
Switch hardware
VLAN name
Copyright © 2010, Juniper Networks, Inc.
You can configure both MAC RADIUS authentication and 802.1X authentication methods
on an interface configured for multiple supplicants. Additionally, if an interface is only
connected to a non-802.1X-enabled host, you can enable MAC RADIUS and not enable
802.1X authentication using the
occurs while the switch determines that the device is does not respond to EAP messages.
Figure 55 on page 2565 shows the two printers connected to the switch.
Figure 55: Topology for MAC RADIUS Authentication Configuration
Table 336 on page 2565 shows the components in the example for MAC RADIUS
authentication.
Settings
EX4200 ports (
default
Chapter 82: Examples: Access Control Configuration
option, and thus avoid the delay that
mac-radius restrict
ge-0/0/0 through ge-0/0/23 )
2565