Clear Pim Join - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

clear pim join

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
clear pim join clear pim join
2434
®
OS for EX Series Ethernet Switches, Release 10.3
clear pim join
<group-address>
<inet | inet6>
<instance instance-name>
<logical-system (all | logical-system-name)>
clear pim join
<group-address>
<inet | inet6>
<instance instance-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
and options introduced in Junos OS Release 10.0 for EX Series switches.
inet6 instance
Clear the Protocol Independent Multicast (PIM) join and prune states.
none —Clear the PIM join and prune states for all groups, family addresses, and instances.
—(Optional) Clear the PIM join and prune states for a group address.
group-address
inet | inet6 —(Optional) Clear the PIM join and prune states for IPv4 or IPv6 family
addresses, respectively.
—(Optional) Clear the join and prune states for a specific
instance instance-name
PIM-enabled routing instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
The clear pim join command cannot be used to clear the PIM join and prune state on a
backup Routing Engine when nonstop active routing is enabled.
clear
show pim join on page 2496
clear pim join on page 2434
When you enter this command, you are provided feedback on the status of your request.
user@host> clear pim join
—(Optional) Perform this operation on all logical
Copyright © 2010, Juniper Networks, Inc.