Show Igmp Group; Table 307: Show Igmp Group Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show igmp group

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 307: show igmp group Output Fields

Field Name Field Description
Name of the interface that received the IGMP membership report. A name of
Interface
indicates that the local routing device joined the group itself.
local
Group address.
Group
Mode the SSM group is operating in:
Group Mode
Source address.
Source
2448
®
OS for EX Series Ethernet Switches, Release 10.3
show igmp group
<brief | detail>
<group-name>
<logical-system (all | logical-system-name)>
show igmp group
<brief | detail>
<group-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display Internet Group Management Protocol (IGMP) group membership information.
—Display standard information about membership for all IGMP groups.
none
brief | detail —(Optional) Display the specified level of output.
—(Optional) Display group membership for the specified IP address only.
group-name
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
clear igmp membership on page 2422
show igmp group (Include Mode) on page 2449
show igmp group (Exclude Mode) on page 2450
show igmp group brief on page 2450
show igmp group detail on page 2450
Table 307 on page 2448 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
—(Optional) Perform this operation on all logical
or .
Include Exclude
command.
show igmp group
Level of Output
All levels
All levels
All levels
All levels
Copyright © 2010, Juniper Networks, Inc.