static
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
static {
address address {
group-ranges {
destination-ip-prefix</prefix-length>;
}
version version;
}
}
[edit logical-systems logical-system-name protocols pim rp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
pim rp],
[edit protocols pim rp],
[edit routing-instances routing-instance-name protocols pim rp]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure static RP addresses. The default static RP address is
other addresses, include one or more
in a logical system only if the logical system is not directly connected to a source.
For each static RP address, you can optionally specify the PIM version and the groups
for which this address can be the RP. The default PIM version is version 1.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Static PIM RPs
Chapter 79: Configuration Statements for IGMP Snooping and Multicast
address
statements. You can configure a static RP
. To configure
224.0.0.0/4
2407