Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2706

Complete Software Guide for Junos
Related
Documentation
Configuring 802.1X Authentication (J-Web Procedure)
2610
®
OS for EX Series Ethernet Switches, Release 10.3
Configure how long, in seconds, the interface waits before retransmitting the initial
5.
EAPOL PDUs to the supplicant:
[edit protocols dot1x]
user@switch# set authenticator interface ge-0/0/5 transmit-period 60
Configure the maximum number of times an EAPOL request packet is retransmitted
6.
to the supplicant before the authentication session times out:
[edit protocols dot1x]
user@switch# set authenticator interface ge-0/0/5 maximum-requests 5
Configuring 802.1X Authentication (J-Web Procedure) on page 2610
Example: Setting Up VoIP with 802.1X and LLDP-MED on an EX Series Switch on
page 2580
Monitoring 802.1X Authentication on page 2633
Verifying 802.1X Authentication on page 2634
Configuring LLDP (CLI Procedure) on page 2622
Understanding Authentication on EX Series Switches on page 2526
To configure 802.1X settings on an EX Series switch using the J-Web interface:
Select >
Configure Security
1.
The 802.1X screen displays a list of interfaces, whether 802.1X security has been
enabled, and the assigned port role.
When you select an interface, the
displays 802.1X details for that interface.
NOTE: After you make changes to the configuration in this page, you must
commit the changes for them to take effect. To commit all changes to
the active configuration, select
Commit Options to Commit Configuration Changes for details about all
commit options.
Click one:
2.
RADIUS Servers—Specifies the RADIUS server to be used for authentication. Select
the check box to specify a server. Click
server settings. Enter information as specified in Table 340 on page 2611.
Exclusion List—Excludes hosts from the 802.1X authentication list by specifying the
MAC address. Click Add
MAC addresses. Enter information as specified in Table 341 on page 2611.
> .
802.1X
Details of 802.1x configuration on port
Commit Options
or
Add Edit
or Edit in the Exclusion list screen to include or modify the
Copyright © 2010, Juniper Networks, Inc.
section
> . See Using the
Commit
to add or modify the RADIUS