Loss-Priority - Juniper JUNOS OS 10.3 - SOFTWARE Manual

loss-priority

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
loss-priority level {
code-points [ aliases ] [ 6–bit-patterns | 3–bit-patterns ];
}
[edit class-of-service classifiers (dscp | ieee-802.1 | inet-precedence |exp) classifier-name
forwarding-class class-name],
[edit class-of-service rewrite-rules (dscp | ieee-802.1 | inet-precedence | exp) rewrite-name
forwarding-class class-name]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement expanded to apply to EXP classifiers in Junos OS Release 10.1 for EX Series
switches.
Specify packet loss priority value for a specific set of code-point aliases and bit patterns.
level —Can be one of the following:
—Packet has high loss priority.
high
low —Packet has low loss priority.
The remaining statement is explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring CoS on EX Series Switches on page 3173
Defining CoS Classifiers (CLI Procedure) on page 3204 or Defining CoS Classifiers (J-Web
Procedure) on page 3206
Defining CoS Rewrite Rules (CLI Procedure) on page 3216 or Defining CoS Rewrite Rules
(J-Web Procedure) on page 3217
Understanding CoS Classifiers on page 3153
Understanding CoS Rewrite Rules on page 3163
Chapter 112: Configuration Statements for CoS
3259