Clear Dot1X - Juniper JUNOS OS 10.3 - SOFTWARE Manual

For ex series ethernet switches
Hide thumbs Also See for JUNOS OS 10.3 - SOFTWARE:
Table of Contents

Advertisement

Complete Software Guide for Junos

clear dot1x

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
clear dot1x interface
clear dot1x interface
clear dot1x
mac-address
2748
®
OS for EX Series Ethernet Switches, Release 10.3
clear dot1x
(interface (all | [interface-names]) | mac-address [mac-addresses])
Command introduced in Junos OS Release 9.0 for EX Series switches.
Reset the authentication state of a port. When you reset a port, reauthentication on the
port is also triggered. The switch sends out a multicast message on the port to restart
the authentication of all connected supplicants. If a MAC address is reset, then the switch
sends out a unicast message to that specific MAC address to restart authentication.
If a supplicant is sending traffic when the
authenticator immediately initiates reauthenticataion. This process happens very quickly,
and it may seem that reauthentication did not occur. To verify that reauthentication has
happened, issue the operational mode command
for
Reauthentication due
and
—(Optional) Clears all ports, or specific ports or specific MAC addresses.
all
—(Optional) Resets the authentication state of all supplicants
interface interface-names
connected to the specified ports (when the port is an authenticator) or for itself
(when the port is a supplicant).
mac-address mac-addresses
addresses.
view
show dot1x on page 2757
Example: Setting Up 802.1X for Single Supplicant or Multiple Supplicant Configurations
on an EX Series Switch on page 2568
Filtering 802.1X Supplicants Using RADIUS Server Attributes on page 2618
clear dot1x interface on page 2748
clear dot1x mac-address on page 2748
user@switch> clear dot1x interface ge-1/0/0 ge-2/0/0 ge-2/0/0 ge5/0/0]
user@switch> clear dot1x mac—address 00:04:ae:cd:23:5f
clear dot1x interface
show dot1x interface detail
Reauthentication interval
—Resets the authentication state only for the specified MAC
command is issued, the
. The value
will be about the same.
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents