Show Captive-Portal Authentication-Failed-Users; Table 349: Show Captive-Portal Authentication-Failed-Users Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show captive-portal authentication-failed-users

Syntax show captive-portal authentication-failed-users
Release Information Command introduced in Junos OS Release 10.1 for EX Series switches.
Description Display the users that have failed captive portal authentication.
Required Privilege view
Level
Related
Documentation
List of Sample Output show captive-portal authentication-failed-users on page 2751
Output Fields Table 349 on page 2751 lists the output fields for the
authentication-failed-users
in which they appear.

Table 349: show captive-portal authentication-failed-users Output Fields

Field Name
Interface
MAC address
User
show captive-portal show captive-portal
user@switch> show captive-portal authentication-failed-users
authentication-failed-users authentication-failed-users
Interface
ge-0/0/10.0
Copyright © 2010, Juniper Networks, Inc.
show captive-portal interface on page 2754
show captive-portal firewall on page 2752
clear captive-portal on page 2746
Example: Setting Up Captive Portal Authentication on an EX Series Switch on page 2602
Configuring Captive Portal Authentication (CLI Procedure) on page 2628
command. Output fields are listed in the approximate order
Field Description
The MAC address configured to bypass captive portal authentication.
The MAC address configured statically on the interface.
Name of the user that has failed captive portal authentication.
MAC address
00:00:00:10:00:02
Chapter 86: Operational Commands for 802.1X
show captive-portal
User
md5user02
2751