Show Captive-Portal Firewall - Juniper JUNOS OS 10.3 - SOFTWARE Manual

For ex series ethernet switches
Hide thumbs Also See for JUNOS OS 10.3 - SOFTWARE:
Table of Contents

Advertisement

Complete Software Guide for Junos

show captive-portal firewall

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
show captive-portal
show captive-portal
firewall brief
firewall brief
show captive-portal
firewall ge-0/0/10.0
2752
®
OS for EX Series Ethernet Switches, Release 10.3
show captive-portal firewall
<brief | detail>
<interface-name>
<interface-name detail>
Command introduced in Junos OS Release 10.1 for EX Series switches.
Display information about the firewall filters for each user that is authenticated on each
captive portal interface.
—Display all the firewall filters on all captive portal interfaces.
none
—(Optional) Display the specified level of output.
brief | detail
—(Optional) Display all the terms of the firewall filters for the specified
interface-name
interface.
interface-name detail
—(Optional) Display all of the terms of the firewall filters for the
specified interface.
view
show captive-portal authentication-failed-users on page 2751
show captive-portal interface on page 2754
clear captive-portal on page 2746
Example: Setting Up Captive Portal Authentication on an EX Series Switch on page 2602
Configuring Captive Portal Authentication (CLI Procedure) on page 2628
show captive-portal firewall brief on page 2752
show captive-portal firewall ge-0/0/10.0 on page 2752
show captive-portal firewall on page 2753
Output fields for the
show captive-portal firewall
specified in firewall filters except policers. Policers are not supported in the terms of the
internally generated dynamic firewall filters that are created when multiple supplicants
authenticate on 802.1X-enabled interfaces.
user@switch> show captive-portal firewall brief
Captive Portal Information:
Interface
State
ge-0/0/1.0
Connecting
ge-0/0/10.0
Connecting
user@switch> show captive-portal firewall ge-0/0/10.0
Filter name: dot1x_ge-0/0/10
Counters:
command include any action modifier
MAC address
User
00:30:48:8c:66:bd
No User
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents