Table 320: Show Multicast Route Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

For ex series ethernet switches
Hide thumbs Also See for JUNOS OS 10.3 - SOFTWARE:
Table of Contents

Advertisement

Required Privilege
Level
List of Sample Output
Output Fields

Table 320: show multicast route Output Fields

Field Name
Field Description
Address family
IPv4 address family (
Group address.
Group
Prefix and length of the source as it is in the multicast forwarding table.
Source
Name of the interface on which the packet with this source prefix is expected
Upstream interface
to arrive.
List of interface names to which the packet with this source prefix is forwarded.
Downstream
interface list
Name of the multicast session.
Session
description
Rate at which packets are being forwarded for this source and group entry (in
Statistics
Kbps and pps), and number of packets that have been forwarded to this prefix.
If one or more of the kilobits per second packet forwarding statistic queries fails
or times out, the statistics field displays
Next-hop ID
Next-hop identifier of the prefix. The identifier is returned by the routing device's
Packet Forwarding Engine and is also displayed in the output of the
multicast nexthops
Upstream protocol
Protocol running on the interface on which the packet with this source prefix is
expected to arrive.
Whether the group is
Route state
Whether the prefix is pruned or forwarding.
Forwarding state
Number of seconds until the prefix is removed from the multicast forwarding
Cache
table. A value of
lifetime/timeout
Number of times that the upstream interface was not available.
Wrong incoming
interface
notifications
Copyright © 2010, Juniper Networks, Inc.
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
view
show multicast route on page 2478
show multicast route brief on page 2478
show multicast route detail on page 2478
show multicast route extensive on page 2479
Table 320 on page 2477 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
INET
) or IPv6 address family (
command.
or
Active
Inactive
indicates a permanent forwarding entry.
never
INET6
).
Forwarding statistics are not available
show
.
show multicast route
command.
Level of Output
All levels
All levels
All levels
All levels
All levels
detail extensive
detail extensive
.
detail extensive
detail extensive
extensive
extensive
extensive
extensive
2477

Advertisement

Table of Contents
loading

Table of Contents