Source-Vlans - Juniper JUNOS OS 10.3 - SOFTWARE Manual

source
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

source-vlans

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
source ip-address {
source-count number;
source-increment increment;
}
[edit logical-systems logical-system-name protocols igmp interface interface-name static
group multicast-group-address],
[edit protocols igmp interface interface-name static group multicast-group-address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify the IP version 4 (IPv4) unicast source address for the multicast group being
statically configured on an interface.
ip-address —IPv4 unicast address.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Enabling IGMP Static Group Membership
source-vlans vlan-list;
[edit protocols igmp-snooping vlan vlan-id | vlan-number data-forwarding receiver]
Statement introduced in Junos OS Release 9.6 for EX Series switches.
Specify a list of multicast VLANs (MVLANs) from which this multicast receiver VLAN
receives multicast traffic. Either all of these MVLANs must be in proxy mode or none of
them can be in proxy mode.
Disabled.
—Names of the MVLANs.
vlan-list
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 56
Example: Configuring Multicast VLAN Registration on EX Series Switches on page 2326
Configuring Multicast VLAN Registration (CLI Procedure) on page 2336
Chapter 79: Configuration Statements for IGMP Snooping and Multicast
2405