Show Class-Of-Service Code-Point-Aliases; Table 431: Show Class-Of-Service Code-Point-Aliases Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show class-of-service code-point-aliases

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
show class-of-service code-point-aliases
<dscp | dscp-ipv6 | exp | ieee-802.1 | inet-precedence>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the mapping of class-of-service (CoS) code point aliases to corresponding bit
patterns.
—Display code point aliases of all code point types.
none
—(Optional) Display Differentiated Services code point (DSCP) aliases.
dscp
—(Optional) Display IPv6 DSCP aliases.
dscp-ipv6
—(Optional) Display MPLS EXP code point aliases.
exp
ieee-802.1 —(Optional) Display IEEE-802.1 code point aliases.
—(Optional) Display IPv4 precedence code point aliases.
inet-precedence
view
show class-of-service code-point-aliases exp on page 3280
Table 431 on page 3279 describes the output fields for the
command. Output fields are listed in the approximate order in which
code-point-aliases
they appear.

Table 431: show class-of-service code-point-aliases Output Fields

Field Name
Code point type
Alias
Bit pattern
Chapter 113: Operational Mode Commands for CoS
Field Description
Type of the code points displayed:
switch), exp (not on EX Series switch),
.
inet-precedence
Alias for a bit pattern.
Bit pattern for which the alias is displayed.
show class-of-service
dscp , dscp-ipv6 (not on EX Series
ieee-802.1 , or
3279