Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2654

Complete Software Guide for Junos
Verification
Purpose
Action
2558
®
OS for EX Series Ethernet Switches, Release 10.3
}
vlans {
guest-vlan {
vlan-id 300;
}
}
To confirm that the configuration is working properly, perform these tasks:
Verifying That the Guest VLAN is Configured on page 2558
Verifying That the Guest VLAN is Configured
Verify that the guest VLAN is created and that an interface has failed authentication and
been moved to the guest VLAN.
Use the operational mode commands:
user@switch> show vlans
Name Tag Interfaces
default
ge-0/0/3.0*
dynamic 40
None
guest 30
None
guest—vlan 300
ge-0/0/1.0*
vlan_dyn
None
user@switch> show dot1x interface ge-0/0/1.0 detail
ge-0/0/1.0
Role: Authenticator
Administrative state: Auto
Supplicant mode: Single
Number of retries: 3
Quiet period: 60 seconds
Transmit period: 30 seconds
Mac Radius: Enabled
Mac Radius Restrict: Disabled
Reauthentication: Enabled
Configured Reauthentication interval: 3600 seconds
Supplicant timeout: 30 seconds
Server timeout: 30 seconds
Maximum EAPOL requests: 2
Guest VLAN member: guest-vlan
Number of connected supplicants: 1
Supplicant: user1, 00:00:00:00:13:23
Operational state: Authenticated
Authentication method: Radius
Authenticated VLAN: vo11
Dynamic Filter: match source-dot1q-tag 10 action deny
Copyright © 2010, Juniper Networks, Inc.