Query-Response-Interval - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

query-response-interval

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
2398
®
OS for EX Series Ethernet Switches, Release 10.3
query-response-interval seconds;
[edit protocols igmp-snooping vlan vlan-id | vlan-name]
Statement introduced in Junos OS Release 9.1 for EX Series switches.
Statement deprecated in Junos OS Release 9.4 for EX Series switches.
NOTE: This statement has been deprecated and might be removed from
future product releases. We strongly recommend that you phase out its use.
Configure the length of time the switch waits to receive a response to a specific query
message from a host.
10 seconds.
—Number of seconds the switch waits to receive a response to a specific query
seconds
message from a host.
Range: 1 through 25 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring IGMP Snooping on EX Series Switches on page 2323
Configuring IGMP Snooping (CLI Procedure) on page 2331
Copyright © 2010, Juniper Networks, Inc.