Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2868

Complete Software Guide for Junos
Table 355: show lldp Output Fields (continued)
Field Name Field Description
LLDP-MED TLVs supported on the switch:
Supported LLDP MED
TLVs
show lldp show lldp
show lldp detail
2772
®
OS for EX Series Ethernet Switches, Release 10.3
—TLV that advertises the primary function of the port.
LLDP MED capabilities
The capabilities values range from 0 through 15:
—Capabilities
0
—Network Policy
1
—Location Identification
2
—Extended Power via MDI-PSE
3
—Inventory
4
5–15 —Reserved
—TLV that advertises the port VLAN configuration and
Network policy
associated Layer 2 and Layer 3 attributes. Attributes include the policy
identifier, application types—such as voice or streaming video—802.1Q VLAN
tagging, and 802.1p priority bits and DiffServ code points.
—TLV that advertises the physical location of the endpoint.
Endpoint location
—TLV that advertises the power type, power source,
Extended power Via MDI
power priority, and power value of the port. It is the responsibility of the PSE
device (network connectivity device) to advertise the power priority on a port.
user@switch> show lldp
LLDP : Enabled
Advertisement interval : 30 seconds
Transmit delay : 2 seconds
Hold timer : 4 seconds
Notification interval : 0 Second(s)
Config Trap Interval : 0 seconds
Connection Hold timer : 300 seconds
LLDP MED : Disabled
MED fast start count : 3 Packets
Interface Parent Interface
all -
me0.0 -
user@switch> show lldp detail
LLDP : Enabled
Advertisement interval : 30 seconds
Transmit delay : 2 seconds
Hold timer : 4 seconds
Notification interval : 0 Second(s)
Config Trap Interval : 0 seconds
Connection Hold timer : 300 seconds
LLDP MED : Disabled
MED fast start count : 3 Packets
Interface Parent Interface
LLDP LLDP-MED
Enabled -
Disabled -
LLDP LLDP-MED
Copyright © 2010, Juniper Networks, Inc.
Level of Output
detail
Neighbor count