Ptopo-Configuration-Maximum-Hold-Time; Ptopo-Configuration-Trap-Interval - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

ptopo-configuration-maximum-hold-time

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

ptopo-configuration-trap-interval

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
2708
®
OS for EX Series Ethernet Switches, Release 10.3
ptopo-configuration-maximum-hold-time seconds;
[edit protocols lldp]
Statement introduced in Junos OS Release 9.6 for EX Series switches.
Configure how long to maintain the physical topology database entries. The physical
topology identifies the devices on the network and their physical interconnections.
seconds —Time to maintain physical topology database entries.
Default: 300
Range: 1 through 2147483647
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show lldp on page 2769
Understanding 802.1X and LLDP and LLDP-MED on EX Series Switches on page 2540
ptopo-configuration-trap-interval seconds;
[edit protocols lldp]
Statement introduced in Junos OS Release 9.6 for EX Series switches.
Specify how often SNMP trap notifications are sent regarding changes in physical topology
global statistics.
SNMP trap notifications of changes in physical topology global statistics are disabled.
seconds —Interval between SNMP trap notifications about physical topology global
statistics.
Range: 0 through 3600
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Copyright © 2010, Juniper Networks, Inc.