Interface - Juniper JUNOS OS 10.3 - SOFTWARE Manual

interface

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Copyright © 2010, Juniper Networks, Inc.
interface (all | interface-name) {
accept-remote-source;
disable;
bfd-liveness-detection {
authentication {
algorithmalgorithm-name;
key-chainkey-chain-name;
loose-check;
}
detection-time {
threshold milliseconds;
}
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
multiplier number;
version (0 | 1 | automatic);
}
family (inet | inet6) {
disable;
}
hello-interval seconds;
mode (dense | sparse | sparse-dense);
neighbor-policy [ policy-names ];
override-interval milliseconds;
priority number;
propagation-delay milliseconds;
reset-tracking-bit;
version version;
}
[edit logical-systems logical-system-name protocols pim],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
pim],
[edit protocols pim],
[edit routing-instances routing-instance-name protocols pim]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Enable PIM on an interface and configure interface-specific properties.
interface-name —Name of the interface. Specify the full interface name, including the
physical and logical address components. To configure all interfaces, you can specify
. For details about specifying interfaces, see the Junos Network Interfaces
all
Configuration Guide.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Chapter 79: Configuration Statements for IGMP Snooping and Multicast
2377