Infinity; Install - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

infinity

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

install

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
2376
®
OS for EX Series Ethernet Switches, Release 10.3
infinity [ policy-names ];
[edit logical-systems logical-system-name protocols pim spt-threshold],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
pim spt-threshold],
[edit protocols pim spt-threshold],
[edit routing-instances routing-instance-name protocols pim spt-threshold]
Statement introduced in Junos OS Release 8.0.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Apply one or more policies to set the SPT threshold to infinity for a source-group address
pair. Use the infinity statement to prevent the last-hop routing device from transitioning
from the RPT rooted at the RP to an SPT rooted at the source for that source-group
address pair.
—Name of one or more policies.
policy-names
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring the PIM SPT Threshold Policy
install;
[edit protocols igmp-snooping vlan vlan-id | vlan-number data-forwarding receiver]
Statement introduced in Junos OS Release 9.6 for EX Series switches.
Install forwarding entries in the multicast receiver VLAN. By default, only the multicast
VLAN (MVLAN) installs forwarding entries for MVLAN groups.
Disabled.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 56
Example: Configuring Multicast VLAN Registration on EX Series Switches on page 2326
Configuring Multicast VLAN Registration (CLI Procedure) on page 2336
Copyright © 2010, Juniper Networks, Inc.