Family Mpls - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

Family MPLS

Related
Documentation
3356
®
OS for EX Series Ethernet Switches, Release 10.3
messages. If the messages stop for three minutes, the RSVP session terminates and the
LSP is lost.
RSVP runs as a separate software process in the Juniper Networks Junos OS and is not
in the packet-forwarding path.
You must configure the core interfaces used for MPLS traffic to belong to
NOTE: You can enable
aggregated Ethernet interfaces. You cannot enable it on tagged VLAN
interfaces.
JUNOS MPLS for EX Series Switches Overview on page 3351
Understanding MPLS and Path Protection on EX Series Switches on page 3357
Example: Configuring MPLS on EX Series Switches on page 3365
Configuring MPLS on Provider Edge Switches Using Circuit Cross-Connect (CLI
Procedure) on page 3405
Configuring MPLS on Provider Edge Switches Using IP Over MPLS (CLI Procedure) on
page 3401
Configuring MPLS on Provider Switches (CLI Procedure) on page 3396
Junos OS MPLS Applications Configuration Guide at
http://www.juniper.net/techpubs/software/junos/junos101/index.html
Junos OS VPNs Configuration Guide at
http://www.juniper.net/techpubs/software/junos/junos101/index.html
on either individual interfaces or
family mpls
Copyright © 2010, Juniper Networks, Inc.
.
family mpls