Table 329: Show Pim Rps Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

Table 329: show pim rps Output Fields

Field Name Field Description
Name of the routing instance.
Instance
Name of the address family:
Family
Address of the rendezvous point.
RP address
Type of RP:
Type
auto-rp
bootstrap
(BSR).
embedded
static
How long to keep the RP active, with time remaining, in seconds.
Holdtime
How long until the local routing device determines the RP to be unreachable,
Timeout
in seconds.
Groups Number of groups currently using this RP.
Group prefixes Addresses of groups that this RP can span.
Address and method by which the RP was learned.
Learned via
How long the RP has been active, in the format
Time Active
Index value of the order in which the Junos OS finds and initializes the interface.
Device Index
Logical unit number of the interface.
Subunit
Either the encapsulation or the de-encapsulation logical interface, depending
Interface
on whether this routing device is a designated router (DR) facing an RP router,
or is the local RP, respectively.
Group Ranges Addresses of groups that this RP spans.
Active groups Number of groups currently using this RP.
using RP
total Total number of active groups for this RP.
2506
®
OS for EX Series Ethernet Switches, Release 10.3
(IPv4) or
inet
—Address of the RP known through the Auto-RP protocol.
—Address of the RP known through the bootstrap router protocol
—Address of the RP known through an embedded RP (IPv6).
—Address of RP known through static configuration.
(IPv6).
inet6
.
hh:mm:ss
Copyright © 2010, Juniper Networks, Inc.
Level of Output
All levels
All levels
All levels
none
brief
All levels
All levels
All levels
brief none
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive