Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3119

Table 380: Supported Match Conditions Applicable to IPv6 Traffic for Firewall Filters on EX
Series Switches (continued)
Match Condition Description
Ethernet type field of a packet. The
ether-type (ipv6)value
EtherType value specifies what protocol is
being transported in the Ethernet frame. In
place of the numeric value, you can specify
the following text synonym:
ipv6
ICMP code field. This value or option
icmp-code number
provides more specific information than
icmp-type
depends upon the associated
you must specify
icmp-code
you can specify one of the following text
synonyms (the field values are also listed).
The options are grouped by the ICMP type
with which they are associated:
parameter-problem
unrecognized-next-header (1)
unrecognized-option (2)
time-exceeded
during-reassembly (1)
ttl-eq-zero-during-transit (0)
destination-unreachable
no-route-to--destination (0)
administratively-prohibited (1)
address-unreachable (3)
port-unreachable (4)
Copyright © 2010, Juniper Networks, Inc.
—EtherType value IPv6 (0x08DD)
. Because the value's meaning
icmp-type
along with
icmp-type
. In place of the numeric value,
—
ip-header-bad (0)
,
— ttl-eq-zero-
,
—
,
,
,
Chapter 100: Firewall Filters—Overview
Supported Platforms and Bind Points
Ingress
EX2200—ports and
VLANs
EX3200 and
EX4200—ports and
VLANs
EX4500—ports and
VLANs
EX8200—ports and
VLANs
EX2200—ports, VLANs,
and Layer 3 interfaces
EX3200 and
,
EX4200—Layer 3
interfaces
EX4500—ports, VLANs,
and Layer 3 interfaces
EX8200—Layer 3
interfaces
,
Egress
EX2200—ports and
VLANs
EX3200 and
EX4200—ports and
VLANs
EX4500—ports and
VLANs
EX8200— ports and
VLANs.
EX2200—ports, VLANs,
and Layer 3 interfaces
EX3200 and
EX4200—Layer 3
interfaces
EX4500—VLANs and
Layer 3 interfaces
EX8200—Layer 3
interfaces
3023