Enabling Lldp-Med On Interfaces; Configuring Location Information Advertised By The Switch; Configuring For Fast Start - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Enabling LLDP-MED on Interfaces

Configuring Location Information Advertised by the Switch

Configuring for Fast Start

Copyright © 2010, Juniper Networks, Inc.
LLDP-MED is turned on by default on EX Series switches.
This topic describes:
Enabling LLDP-MED on Interfaces on page 2625
Configuring Location Information Advertised by the Switch on page 2625
Configuring for Fast Start on page 2625
LLDP-MED is enabled on all interfaces by default. If it is disabled, you can enable
LLDP-MED by configuring it on all interfaces or on specific interfaces.
To configure LLDP-MED on all interfaces or on a specific interface:
[edit protocols lldp-med]
user@switch# set interface ge-0/0/2.0
You can configure the location information that is advertised from the switch to the
LLDP-MED device. You can specify a civic-based location (geographic location) or a
location based on an elin (emergency location identification string):
To specify a location by geography:
[edit protocols lldp-med]
user@switch# set interface ge-0/0/2.0 location civic-based country-code US
user@switch# set interface ge-0/0/2.0 location civic-based ca-type 1 ca-value "El
Dorado County"
user@switch# set interface ge-0/0/2.0 location civic-based ca-type 2 ca-value CA
user@switch# set interface ge-0/0/2.0 location civic-based ca-type 3 ca-value
Somerset
user@switch# set interface ge-0/0/2.0 location civic-based ca-type 6 ca-value
"Mount Aukum Road"
user@switch# set interface ge-0/0/2.0 location civic-based ca-type 19 ca-value 6450
user@switch# set interface ge-0/0/2.0 location civic-based ca-type 21 ca-value
"Holiday Market"
To specify a location using an
[edit protocols lldp-med]
user@switch# set interface ge-0/0/2.0 location elin 4085551212
You can specify the number of LLDP-MED advertisements sent from the switch in the
first second after it has detected an LLDP-MED device. The default is 3; to set it to another
value:
[edit protocols lldp-med]
Chapter 83: Configuring Access Control
string:
elin
2625