Copyright © 2010, Juniper Networks, Inc.
Figure 59: Conceptual Model: Dynamic Filter Updated for Each New User
This is a conceptual model of the internal process—you cannot access or view the dynamic
filter.
NOTE: If the firewall filter on the interface is modified after the user (or
nonresponsive host) is authenticated, the modifications are not reflected in
the dynamic filter unless the user is reauthenticated.
In this example, you configure a firewall filter to count the requests made by each endpoint
authenticated on interface
192.0.2.16/28
, and set policer definitions to rate limit the traffic. Figure 60 on page 2600
shows the network topology for this example.
Chapter 82: Examples: Access Control Configuration
to the file server, which is located on subnet
ge-0/0/2
2599