Table 306: Mtrace To-Gateway Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos
Required Privilege
Level
List of Sample Output
Output Fields
mtrace to-gateway mtrace to-gateway
2446
®
OS for EX Series Ethernet Switches, Release 10.3
—(Optional) Do not use the router-alert IP option.
no-router-alert
—(Optional) Send trace response to a host or multicast address.
response response
routing-instance routing-instance-name
—(Optional) IP time-to-live value. You can specify a number between
ttl ttl
Local queries to the multicast group use TTL
—(Optional) Always request the response using unicast.
unicast-response
wait-time wait-time —(Optional) Number of seconds to wait for a response. The default
value is .
3
view
mtrace to-gateway on page 2446
Table 306 on page 2446 describes the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 306: mtrace to-gateway Output Fields

Field Name
Mtrace from
to
via group
Querying full reverse path
number-of-hops
router-name
address
protocol
Round trip time
total ttl of
user@host> mtrace to-gateway gateway 192.1.3.2 group 225.1.1.1 interface 192.1.1.73 brief
Mrace from 192.1.1.73 to 192.1.1.2 via group 225.1.1.1
Querying full reverse path... * *
0 routerA.lab.mycompany.net (192.1.1.2)
-1 routerA.lab.mycompany.net (192.1.1.2)
-2 routerB.lab.mycompany.net (192.1.2.2)
—(Optional) Trace a particular routing instance.
1 . Otherwise, the default value is
Field Description
IP address of the receiver.
IP address of the source.
IP address of the multicast group (if any).
Indicates the full reverse path query has begun.
Number of hops from the source to the named router or switch.
Name of the router or switch for this hop.
Address of the router or switch for this hop.
Protocol used (for example, PIM).
Average round-trip time, in milliseconds (ms).
Time-to-live (TTL) threshold.
PIM
PIM
and
0
command.
mtrace to-gateway
thresh^ 1
thresh^ 1
Copyright © 2010, Juniper Networks, Inc.
.
225
127 .