Enterasys Matrix 2G4072-52 Configuration Manual page 192

Preparing the Device for Router Mode
Reviewing and Configuring Routing Modules
2.3.2.4 router
Use this command to enable routing mode on a module. This must be a module previously
configured for routing using the set router command as described in
be configured on one or two modules.
router module
Syntax Description
module
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable routing on module 1:
Matrix(rw)->router 1
2-166 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies the module on which to enable routing mode.
Section 2.3.2.2. Routing may