Enterasys Matrix 2G4072-52 Configuration Manual page 166

General Configuration Command Set
Managing Configuration and Image Files
2.2.9.6 delete
Use this command to remove an image or a CLI configuration file from the Matrix system.
delete filename
NOTE: Use the show config command as described in
current image and configuration file names.
Syntax Description
filename
Command Type
Switch.
Command Mode
Read-Write.
Command Defaults
None.
Examples
This example shows how to delete the "myconfig" configuration file from slot 3:
Matrix(rw)->delete slot3/myconfig
This example shows how to delete the "010300" image file:
Matrix(rw)->delete images/010300
2-140 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies the local path name to the file. Valid directories
are /images and /slotN.
Section 2.2.9.3 to display