Set Lldp Port Network-Policy - Enterasys Matrix 2G4072-52 Configuration Manual

3.2.4.18

set lldp port network-policy

Use this command to configure network policy for a set of applications on a port or range of ports.
The policies configured with this command are sent in LLDPDUs as LLDP-MED Network Policy
TLVs. Multiple Network Policy TLVs can be sent in a single LLDPDU.
set lldp port network-policy {all | voice | voice-signaling | guest-voice |
guest-voice-signaling | softphone-voice | video-conferencing | streaming-video
| video-signaling} [state {enable | disable}] [ tag {tagged | untagged}]
[vid {vlan-id | dot1p}] [cos cos-value] [dscp dscp-value] port-string
Syntax Description
all
voice
voice-signaling
guest-voice
guest-voice-signaling Configure the guest voice signaling application.
softphone-voice
video-conferencing
streaming-video
video-signaling
state enable | disable
tag tagged | untagged (Optional) Indicates whether the application being
Configure all applications.
Configure the voice application.
Configure the voice signaling application.
This application will not be advertised if the voice
application is configured with the same parameters.
Configure the guest voice application.
This application will not be advertised if the guest-voice
application is configured with the same parameters.
Configure the softphone voice application.
Configure the video conferencing application.
Configure the streaming video application.
Configure the video signaling application.
This application will not be advertised if the
video-conferencing application is configured with the
same parameters.
(Optional) Enable or disable advertising the application
information being configured.
configured is using a tagged or untagged VLAN. If
untagged, both the VLAN ID and the CoS priority fields
are ignored and only the DSCP value has relevance.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
3-53