Show Ciscodp Port Info - Enterasys Matrix 2G4072-52 Configuration Manual

3.2.3.2

show ciscodp port info

Use this command to display summary information about the Cisco Discovery Protocol on one or
more ports.
show ciscodp port info [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, CiscoDP information will be displayed for all ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display Cisco Discovery Protocol information for ports fe.1.1 through
fe.1.5:
Matrix>(su)->show ciscodp port info fe.1.1-5
port
-----------------------------------------------
fe.1.1
fe.1.2
fe.1.3
fe.1.4
fe.1.5
Table 3-3 provides an explanation of the command output.
(Optional) Displays information about specific port(s). For
a detailed description of possible port-string values, refer to
Section 4.1.1.
state vvid
enabled none
enabled none
enabled none
enabled none
enabled none
Matrix DFE-Platinum and Diamond Series Configuration Guide
Discovery Protocols Command Set
trust cos
untrusted 0
untrusted 0
untrusted 0
untrusted 0
untrusted 1
Cisco Discovery Protocol
3-15