Step 4. Install Caster Wheels (Fixed Frame) - MacDon M105 Assembly Instructions Manual

STEP 4. INSTALL CASTER
WHEELS (FIXED FRAME)
There are two methods that can be used.
I. METHOD 1
a. Support rear of windrower with a forklift (or
equivalent).
Distance between walking beam and ground
should be 55 - 58 in. (1400 - 1473 mm).
b. Position caster spindle into walking beam.
c. Slowly lower rear
manoeuvring caster so that spindle slides freely
into walking beam.
Form 169558
UNLOADING AND ASSEMBLY
55 - 58 in.
(1400 - 1473 mm)
FROM GROUND
of windrower, while
B
A
d. Secure caster in walking beam with washer (A),
bushing (B), and clip (C).
e. Raise rear of windrower again, and repeat
above steps for other caster.
f. Remove rear shipping stand.
g. Proceed to STEP 6. INSTALL STEPS.
14
C
(continued on next page)
Revision A