5.10.2 Maintaining Engine Air Filters
Removing Engine Primary Air Filter
1. Stand on the right service platform.
2. Open the hood. For instructions, refer to
3. Slightly lift catch (A) at the side of end cap (B). Rotate the
end cap counterclockwise until it stops.
4. Make sure arrow (A) lines up with the UNLOCK symbol on
the end cap.
5. Pull off the end cap.
6. Check aspirator duct opening (A) for obstructions or
damage. Clean if necessary.
7. Place the cover on the platform.
NOTE:
Hoses can be left connected to the cover.
215922
MAINTENANCE AND SERVICING
5.3.1 Opening Hood, page
Figure 5.87: Air Filter Housing
Figure 5.88: Air Filter
Figure 5.89: Air Filter
291
239.
A
B
A
A
Revision A