Engine Air Intake - MacDon M 2009 Series Assembly Instructions Manual

C. ENGINE AIR INTAKE
M155, M105
a. Check that air cleaner cap is firmly attached, and
that latches and clamps are secure.
b. Check constant torque spring clamp (A) at back
of air cleaner (M155, M105).
HOLD 0.018 in. (0.46 mm) GAU GE BETWEEN
MIDDLE COILS, AND TIGHTEN CLAMP UNTIL
GAUGE IS SNUG. REMOVE GAUGE.
c. Constant torque spring type clamps (A) and (C)
should be tightened to achieve gap as shown.
Form 169242
PRE-DELIVERY CHECKS
M205
A
B
d. Check constant torque clamps (B) on charge air
cooling duct connection at turbocharger inlet
(M205). Constant torque type clamps (B) should
be tightened to achieve gap as shown.
C
C
e. Check constant torque clamps (C) on charge air
cooling duct connections at turbocharger outlet
and engine air intake. Cl amps (C) should be
tightened to achieve gap as shown opposite.
104
0.157 +/-.02 in.
(4 +/- 0.5 mm)
M205
Revision F