Heating System - Goldacres G6 Crop Cruiser 2 Series Operator's Manual

Appendix – Integrated Systems
10
The 1st heating core Isolating Tap located on the right hand
side of the engine at the rear of the exhaust manifold.

Heating System

Coolant from the engine flows through the
heater core causing it to radiate heat into the
cabin when the engine is up to temperature.
The volume of the water travelling through
the system, and therefore the amount of heat
transferred, may be adjusted by setting the
temperature on the A/C head unit.
To enable the heating core to be isolated from
the engine two taps have been installed.
If the heating is not working when the engine is warm,
ensure that the isolating taps are allowing coolant to flow
through to the heater core.
250
The 2nd heating core Isolating Tap located on the left hand
side on top of the engine near the header tank.
The first tap is located on the right hand
side of the engine at the rear of the exhaust
manifold.
The second isolating tap is located on the
left hand side on top of the engine near the
header tank.
GA8701177 REV 2 APRIL 2022