Display; Machine - Goldacres G6 Crop Cruiser 2 Series Operator's Manual

Hide thumbs Also See for G6 Crop Cruiser 2 Series:
Table of Contents

Advertisement

Preparation for Use – Setting Up
4
Press the appropriate touch buttons to set local Date & Time.
To Pre-Set the G-Hub:
1 Start the engine.
2 Press the Settings touch button on the G-Hub Main screen
to open the Display screen.

1 Display

The Display screen gives access to set both Date & Time.
To Set the Date:
i)
Press the Day Minus (-) or Plus (+) touch buttons to
select the correct day.
ii) Press the Month Minus (-) or Plus (+) touch buttons to
select the correct month.
iii) Press the Year Minus (-) or Plus (+) touch buttons to
select the correct year.
The 'SAVE' touch button will appear on the left hand side of the screen if a new
value is entered or a change made in the G-Hub system.
If the 'SAVE' touch button is not pressed, then any current changes or entered
value or values will be lost and previous settings will remain.
The 'SAVE' touch button can be pressed at any stage or screen change to
ensure new settings are saved and not accidentally lost.
The screen will return to the G-Hub home screen after the 'SAVE' touch button
is pressed.
74
Pressing the Help (?) touch button will provide more information.
To Set the Time:
i)
Press the Hour Minus (-) or Plus (+) touch buttons to
select the correct hour of the day.
ii) Press the Minutes Minus (-) or Plus (+) touch buttons to
select the correct time in minutes.
iii) Press the 24 Hour Time touch button if 24 hour is
preferred. The touch button will go Green when
selected & Grey when deselected.
Press the SAVE touch button to save changes & exit the screen.
Press the Machine Tab touch button to open the Machine screen.

2 Machine

Press the Machine Tab touch button to open the Machine
screen and the Machine screen opens displaying:
i)
Sprayer Model
ii) 4WD
iii) Boom Type
iv) Pump Type
v) Boom Calibration.
The Machine Settings screen is locked for protection from
uninformed or accidental alteration.
The screen must be unlocked before any setting or
alterations can be made.
GA8701177 REV 2 APRIL 2022

Advertisement

Table of Contents
loading

Table of Contents