Goldacres G6 Crop Cruiser 2 Series Operator's Manual page 90

Hide thumbs Also See for G6 Crop Cruiser 2 Series:
Table of Contents

Advertisement

Preparation for Use – Setting Up
4
Front Cover of the Raven AutoBoom XRT Calibration &
Operation Manual.
Pre-Set the AutoBoom
XRT (Option)
If fitted the AutoBoom XRT controller is pre-
set and tested for spraying applications prior
to delivery.
However, it is recommended that all settings
and operation be checked and tested for
accuracy prior to spraying applications.
It is the operator's responsibility to correctly
operate all controller and sprayer functions at
all times.
For instructions on the configuring & operating
the AutoBoom XRT controller, refer to the
Raven XRT Operation Manual supplied.
90
Lift up the Armrest console and release the G-Hub cable
harness from underneath.
Alternate Screen Mounting
Alternate screen mounting is availble for
both the G-Hub Controller and GPS screens
according to operator preference.
G-Hub Controller Screen
The G-Hub Controller Screen can be mounted
on the cabin rail according to operator
preference.
To Mount the G-Hub Screen on the Cabin Rail:
1 Ensure the Engine key is in Off position.
2 Disconnect the G-Hub cables at the rear
of the console & remove the console.
3 Lift up the Armrest Console & release the
G-Hub cable harness from underneath.
4 Lower the Armrest Console & realign the
G-Hub cable harness for the cabin rail
mounting.
Position the ball mount on the cabin rail & fit the G-Hub
Console & cables.
5 Position the ball mount on the cabin rail &
fit the G-Hub Console & cables.
6 Adjust the position of the G-Hub
Controller to suit the operator.
GPS Screen
The GPS Screen can be mounted to the
Armrest Console according to operator
preference.
To Mount the GPS screen on the Armrest
Console:
1 Ensure the Engine key is in Off position.
2 Remove the G-Hub Screen from the
Armrest Console & mount it to the cabin
rail as per instructions for the G-Hub
Controller Screen.
3 Fit the GPS Screen to the ball mount on
the Armrest Console & fit the GPS cables.
4 Adjust the position of the GPS Screen to
suit the operator.
GA8701177 REV 2 APRIL 2022

Advertisement

Table of Contents
loading

Table of Contents