Steering Column - Goldacres G6 Crop Cruiser 2 Series Operator's Manual

Hide thumbs Also See for G6 Crop Cruiser 2 Series:
Table of Contents

Advertisement

Your Sprayer at a Glance - Cabin
3
The cabin is equipped with an Operator's seat (left) and a
fold-up Training seat (right - folded up).
Training Seat
The Training Seat is fitted with a lap seat
belt which must be worn at all times when
operating with a trainee or passenger present.
A storage area/fridge option facility is directly
underneath the training seat. It is easilly
accessed by lifting up the training seat, then
lifting the storage area lid.
The Training Seat with the lap seat belt (shown left) and
underneath, a storage area/fridge option facility (shown right).
32

Steering Column

The Steering Column provides three
adjustments to quickly & easily position the
steering wheel for the operator.
1 Foot Lever - Fore/Aft
Column Adjustment
This adjustment allows the steering column
to be quickly moved forward or rearward as
requred.
To make adjustment:
i)
While sitting in the operator's seat, hold
the steering wheel with both hands, press
the foot lever downwards (left hand side
column base) with your foot to release the
column lock.
ii) With the foot lever pressed down, move
the steering column with your hands
forward or rearward as desired.
iii) Release the foot lever to lock the steering
column in the desired position.
Use the Foot Lever Fore/Aft Column
Adjustment to quickly & easily move
the steering wheel away for exiting and
entering the operator seat.
3
2
1
Steering Column/Steering Wheel Adjustment points (refer to
numbered information & headings on this page for instruction).
2 Tilt Lever Adjustment
This adjustment further refines the closeness
and angle of the steering wheel for operator
comfort & steering efficiency.
To make adjustment:
i)
While seated in the operator's seat
with the Foot Lever Fore/Aft Adjustment
completed, hold the steering wheel with
your right hand and use your left hand to
lift the Tilt Lever upwards to release the tilt
adjustment lock.
ii) With the Tilt Lever held up, move the
upper steering column & steering wheel to
the desired position.
iii) Release the Tilt Lever to lock the upper
steering column in the desired position.
3 Steering Wheel Height
Adjustment
This adjustment allows the height of the
steering wheel to be raised or lowered to suit
the operator.
To make adjustment:
i)
While seated in the operator's seat,
hold the steering wheel with one hand
and with other hand, grasp the steering
wheel Centre Cap & rotate it 90 degrees
anti-clockwise (quarter turn) to unlock the
height adjustment.
ii) Now lift or lower the steering wheel to the
desired height.
iii) Grasp the steering wheel Centre Cap
again & rotate it 90 degrees clockwise
(quarter turn) to lock the desired steering
wheel height.
GA8701177 REV 2 APRIL 2022

Advertisement

Table of Contents
loading

Table of Contents