Goldacres G6 Crop Cruiser 2 Series Operator's Manual page 184

Service – Lubrication & Maintenance
8
Service Parts cont.
Belts
- Service Item
V Belt, Air Conditioner Compressor
Belt, Serpentine, Water Pump Alternator
Hydraulic pump belt
Headlights
- Service Item
Headlight globe - Low beam - LED
Headlight globe - High beam - LED
Service Instructions
G-Hub Controller Service Tab
The G-Hub Controller provides quick reference to service
intervals and service history.
To Access the Service Screen:
1 Press 'Settings' touch button to display the Settings menu,
(see the illustration top right)
2 Press the 'Service' tab touch button to display the 'Service'
screen.
The 'Service' screen provides three tab screens:
i) Hardware
ii) Software (refer to chapter 3 'Cabin' for instructions)
iii) GA Fault Codes (refer to chapter 9 'Trouble Shooting'
for instructions).
184
Part No. Goldacres Part No. Generic
GA5071435
GA5075275
GA2700098
Part No. Goldacres Part No. Generic
GA3000492
GA3000492
Hardware
The Service' Display tab touch button opens with 'Hardware' tab
screen.
The 'Hardware' screen shows two columns:
i) Service Intervals
ii) Service History.
13A1080
-
-
Press the 'Service' tab to display the Hardware tab screen with Service Intervals &
To Record Service Intervals:
Machine Service
HB3-LED
After the Machine service has been completed, press the
'Machine Serviced' touch button to record the service.
HB3-LED
The engine hour reading is automatically recorded.
Pump Service
After the Pump service has been completed, press the 'Pump
Serviced' touch button to record the service.
The engine hour reading is automatically recorded.
Press the 'Machine Service' & 'Pump Service' touch buttons respectively to record
Service History.
each service.
GA8701177 REV 2 APRIL 2022