Goldacres G6 Crop Cruiser 2 Series Operator's Manual page 221

The Joystick Module (A) & Console Switch Module (B) located under the Joystick
console in the cabin.
3 The Console Module is located under the control console in
the cabin. Remove the top cover of the console and check
the connectors.
4 After checking the Console Module connectors, re-check
the function of the relevant push button using the control
console push buttons & rocker switches and the G-Console
Diagnostic screen.
5 If the function continues to not light up it will be neccessary
check the relevant function in Virtual Mode.
GA8701177 REV 2 APRIL 2022
Trouble Shooting – Fast Tracking Problems
Press the Virtual Mode touch button {A} to engage Virtual Mode, then press the
relevant touch button to test its function (eg, In Fold Stage 2).
To Check a Function in Virtual Mode:
1 Press the Virtual Mode touch button to engage/disengage
the Virtual Mode.
The touch button displays Green when engaged & Grey
when disgaged.
2 Press the relevant screen switch (of the top row of the
screen) to test its function (eg, In Fold Stage 2).
If working, the boom will fold while the switch is being
pressed and stop when the switch is released.
3 When testing is completed, press the Virtual Mode touch
button to disengage Virtual Mode.
The touch button displays Grey when disgaged & Green
when engaged.
(A)
Press the 'External Display' tab touch button to display the screen - this screen is
used to check External Display functions & operate the Fill touch button functions
iv) External Display
Press the External Display tab touch button to display the
External Display screen.
The External Display screen provides two testing functions:
• To check the function of each touch button and push
button of the external control functions
• To operate Fill only touch buttons in Virtual Mode.
In Virtual mode, the RPM Raise, Pump Product, Fill
Product, Agitator, Hopper, Pump Rinse, FIll Rinse,
Fill Pump and Rinse Nozzle switches can be used to
operate the various functions.
Only 'Fill' screen functions can be operated or checked in Virtual Mode.
'Clean' screen functions cannot be checked or operated in Virtual Mode.
9
in Virtual Mode.
221