Goldacres G6 Crop Cruiser 2 Series Operator's Manual page 40

Your Sprayer at a Glance - Cabin
3
4 Demisting Windows
Mode Touch Button
Outside Temperature
Touch Button
- Decrease
Touch Button
Control touch buttons & Displays of the Air Conditioner Panel (information on each item (shown above) is given on this page).
1 Automatic Mode/Indicator Light
In Automatic Mode the air conditioner heater,
compressor & ventilation operation is fully
automatic to achieve and maintain the pre-set,
constant cab temperature. The Automatic Mode
is ideal for high outside temperatures.
To Activate the Automatic Mode:
Press the following touch buttons to switch off:
• 2 ECON Mode
• 3 Manual Ventilation Mode
• 4 Demisting Windows Mode
Indicator lights of Modes 2, 3 & 4 go Off and the
Automatic Mode light (A) illuminates. Automatic
Mode is now active.
When outside temperatures go below 10°C, the Automatic
Mode shuts down the air conditioner compressor.
40
2 ECON Mode
Fan Speed
Touch Button
Display
3 Manual Ventilation
Mode Touch Button
+ Increase
Touch Button
2 ECON Mode
In ECON mode, the air compressor is shut
Off while the heater & ventilation (depending
on settings) are controlled automatically. This
mode is used when cooling is not required.
To Activate the ECON Mode:
• Press the ECON Mode touch button.
The ECON Mode Indicator light
illumiates and the Automatic Mode
Indicator (A) is Off. The ECON Mode is
now active.
Temperature Display
1 Automatic Mode/Indicator Light
3 Manual Ventilation Mode
In Manual Ventilation Mode, the heater and
compressor are are controlled automatically
(depending on settings) while the fan speed is
manually controlled.
This Mode offers opportunity of setting slower
or faster fan speeds with slower temperature
adaptation in case of large deviations between
cab and outside temperatures.
To Activate the Manual Ventilation Mode:
• Press the 'Manual Ventilation Mode
touch button and its Indicator light
illuminates. The Manual Ventilation
Mode is now active.
Current fan speed is shown on the Fan
Speed Display. One bar represents 10%
speed increment between 0 & 100%.
To Reduce the Fan Speed:
• Press the '- Decrease' touch button
once for each 10% speed decrease.
To Increase the Fan Speed:
• Press the '+ Increase' touch button
once for each 10% speed increase
Changed settings are activated after 5 seconds.
4 Demisting Windows Mode
The Demisting Windows Mode is used for
demisting cabin windows. The compressor
switches to run constantly with maximum fan
speed. The heater operates at pre-set value.
To Activate the Demisting Windows Mode:
• Press the 'Demisting Windows Mode'
touch button and its Indicator light
illuminates. The Demisting Windows
Mode is now active and the the fan
operates at maximum speed.
To Alter the Fan Speed:
• Refer to previous Fan Speed
instructions under "3 Manual
Ventilation Mode".
GA8701177 REV 2 APRIL 2022