Joystick Boom Controls; Dual Tilting Both Boom Wings; Boom Tilt - L Up/Down & R Up/Down - Goldacres G6 Crop Cruiser 2 Series Operator's Manual

Press & hold Down the lower on the Dual Tilt rocker switch
of the Joystick to lower the boom wings ends.

Joystick Boom Controls

Boom push buttons & a rocker switch on the
Joystick provide the following functions:
• Dual Tilting Both Boom Wings (rocker
switch)
• Boom Tilt - L Up/Down & R Up/Down
• Boom Master On/Off
• Boom Lift/Lower
• Fence Nozzle L/R.

Dual Tilting Both Boom Wings

The Dual Tilt rocker switch is used to lower
or raise the tilt of the boom wings during
operations and when folding & unfolding
booms manually.
To Dual Tilt-Down Both Boom Wings:
i) Press & hold Down the Dual Tilt Up/Down
rocker switch on the Left Side to lower
both left & right boom wings together.
ii) Release the rocker switch to hold the
wings in their desired raised position.
GA8701177 REV 2 APRIL 2022
Press & hold Up the lower on the Dual Tilt rocker switch of
the Joystick to raise the boom wings ends.
To Dual Tilt-Up Both Boom Wings:
i) Press & hold Up the Dual Tilt Up/Down
rocker switch on the Left Side to lower
both left & right boom wings together.
ii) Release the rocker switch to hold the
wings in their desired raised position.
Operation – Ready to Spray
Press & hold the L Arrow Up part of the Boom Tilt push
button to tilt up the left hand boom end.
Boom Tilt - L Up/Down & R Up/
Down
The Boom Tilt - L Up/Down & R Up/Down ker
switch is used to individually lift or lower the
angle the boom from left to right or right to left
to more closely follow ground contour.
The boom wings pivot on the centre section
and the left or right boom wing is raised or
lowered - the outer end of the wing moves
furtherest.
To Tilt Up the Left Hand Boom:
i) Press & hold the L Arrow Up part of the
Boom Tilt push button .
ii) Release the ker switch when the desired
tilt is achieved.
Press & hold the L Arrow Down part of the Boom Tilt push
button to tilt down the left hand boom end.
To Tilt Down the Left Hand Boom:
i) Press & hold the L Arrow Down on the
Boom Tilt ker switch .
ii) Release the push button to hold the wing
in its desired lowered position.
6
115