Goldacres G6 Crop Cruiser 2 Series Operator's Manual page 52

Your Sprayer at a Glance - Cabin
3
Pressure Filter Clean Touch Button
Press the Filter Clean touch button (shown above) and drop
down menu of three touch buttons appears:
• On
Press the 'On' touch button & the screen returns with
the 'Filter Clean' touch button displaying 'On' (Green)
• Off
Press the 'Off' touch button & the screen returns with
the ''Filter Clean' touch button displaying 'Off' (Grey).
• Auto
Press the 'Auto' touch button & the screen returns with
the ''Filter Clean' touch button displaying 'Auto' (Amber).
When set to 'Auto', pressure filter flushing automatically
activates when all boom sections are switched Off or
the boom Master Switch is turned Off.
Each time the boom sections are turned Off, a valve
opens passing flow through the filter to take trapped
particles back to product tank thereby clearing the
element. The red valve at the base of the pressure filter
must be open for this to function.
The Filter Clean touch button allows the pressure filter to be cleaned by
backflushing while operating. The red valve at the base of the filter must be open
for this to function.
While this is very useful, the pressure filter must be manually cleaned on a regular
basis. See Chapter 6 'Operation' for pressure filter cleaning instructions.
52
Agitator Touch Button
Press the Agitator touch button (shown above) and drop down
menu of three touch buttons appears:
• On
Press the 'On' touch button & the screen returns with
the 'Agitator' touch button displaying 'On' (Green).
• Off
Press the 'Off' touch button & the screen returns with
the 'Agitator' touch button displaying 'Off' (Grey).
• Auto
Press the 'Auto' touch button & the screen returns with
the 'Agitator' touch button displaying 'Auto' (Amber).
When set to Auto', the agitator automatically switches
Off when minimum preset tank level is reached. Refer
to Chapter 4 'Setting Up', 'Preset the G-Hub Controller'.
The red valve at the base of the pressure filter must be open for back-flush
cleaning to function.
RapidFlow Touch Button
Press the RapidFlow touch button (shown above) and a drop
down menu of four touch buttons appears:
• On
Press the 'On' touch button & the screen returns with
the 'RapidFlow' touch button displaying 'On' (Green)
• Off
Press the 'Off' touch button & the screen returns with
the 'RapidFlow' touch button displaying 'Off' (Grey)
• Auto
Press the 'Auto' touch button & the screen returns with
the 'RapidFlow' touch button displaying 'Auto' (Amber)
• Prime
Press the 'Prime' touch button & the screen returns
with the 'RapidFlow' key displaying 'Prime' (Amber)
Priming the boom lines begins with a count down timer.
When boom priming is completed, the 'RapidFlow' key
displays 'Auto' (Amber).
GA8701177 REV 2 APRIL 2022