Goldacres G6 Crop Cruiser 2 Series Operator's Manual page 53

Hide thumbs Also See for G6 Crop Cruiser 2 Series:
Table of Contents

Advertisement

Pump Touch Button
The Pump touch button provides selection of the Rinse tank or
Product tank as the water source.
Press the Pump touch button (shown above) and a drop down
menu of three touch buttons appears.
Press the touch button required:
Rinse
Press the 'Rinse' touch button & the screen returns with
the 'Pump' touch button displaying 'Rinse' (Blue)
Product
Press the 'Product' touch button & the screen returns
with the 'Pump' touch button displaying 'Product'
(Green)
Off
Press the 'Off' touch button & the screen returns with
the 'Pump' touch button displaying 'Off' (Grey)
GA8701177 REV 2 APRIL 2022
RPM Raise Touch Button
The RPM Raise touch button allows engine speed to be raised
while stationary (Park Brake must be On) for filling & mixing
functions.
Press the RPM Raise touch button (shown above) and a drop
down menu of two touch buttons appears. Press the touch
button required:
On
Press the 'On' touch button & the screen returns with
the 'RPM Raise' touch button displaying 'On' (Green)
The engine will increase to the preset RPM Raise speed
Off
Press the 'Off' touch button & the screen returns with
the 'RPM Raise' touch button displaying 'Off' (Grey).
The engine will reduce to normal idle speed.
Cabin – Your Sprayer at a Glance
Boom Section Touch Buttons
Boom Section touch buttons are used to switch selected boom
sections On & Off.
Press the Boom Section touch button to cycle between On &
Off as required:
Boom Sections
Press each touch button as required to activate or
deactivate boom sections as required.
Section touch buttons display:
- Amber while waiting for the Spray Controller
- Green when On
- Clear when Off.
Fenceline Nozzle Indicators
The Fenceline Nozzle symbols (FL & FR) on the left & right ends
of the boom, show whether the fenceline nozzles are On or Off.
Fenceline Nozzle touch buttons display:
- Amber while waiting for the Spray Controller
- Green when On
- Clear when Off.
Switching the fenceline nozzles 'On' or 'Off' is controlled with
the 'Fence Nozzle L/R' push button on the Joystick controller.
3
53

Advertisement

Table of Contents
loading

Table of Contents