Goldacres G6 Crop Cruiser 2 Series Operator's Manual page 37

The Headlights Switch.
Front Light Switches
Four exterior light switches, on the Overhead
Panel in front of the operator are used for:
1 Headlights
2 Inner Front Work Lights
3 Outer Front Work Lights
4 Rear Work Lights.
To operate the lights, rotate each switch to the
position (0, 1, 2 or 3) for the lights required.
The Headlight Switch must be On (Position 1,
2 or 3) for the other three switches to work.
1 Headlights Switch
The Headlights Switch controls the
Headlights, Interior Cabin Lights, Tail Lights
& Outer Boom Marker Lights:
• Position 0 is Off.
• Position 1 is Interior Cabin Lights, Tail
and Park Lights & Outer Boom Marker
Lights On.
• Position 2 or 3 is Headlights, Interior
Cabin Lights, Tail and Park Lights &
Outer Boom Marker Lights On.
GA8701177 REV 2 APRIL 2022
The Inner Front Work Lights Switch.
2 Inner Front Work Lights Switch
The Inner Front Work Lights Switch
controls the Inner Front Work Lights.
• Position 0 is Off
• Position 1, 2 or 3 is Inner Front Work
Lights On.
An Interior Cabin Light (located in RH rear
corner ceiling) automatically illuminates
when either Park lights or Headlights are
switched On.
The Interior Light (located in RH rear corner ceiling)
automatically illuminates when either Park lights or
Headlights are switched On.
Cabin – Your Sprayer at a Glance
The Outer Front Work Lights Switch.
3 Outer Front Work Lights Switch
The Outer Front Work Lights Switch
controls the Outer Front Work Lights:
• Position 0 is Off
• Position 1, 2 or 3 is Outer Front Work
Lights On.
To switch between High and Low beam Headlights, use
the Multi-Function Lever located on the left hand side of
the steering column.
The Headlights Switch must be first turned On.
The Rear Work Lights Switch.
4 Rear Work Lights Switch
The Rear Work Lights Switch controls
the Rear Work Lights & Night Pro LED
Boom Lights:
• Position 0 is Off
• Position 1, 2 or 3 is Rear Work Lights
& Night Pro LED
Boom Lights On.
The Headlights Switch must be turned On for all Front &
Rear work lights to function.
All lights can be turned Off by returning the Headlights
Switch to 0 (Off).
3
37