Shock Absorbers; Air Conditioner Compressor Belt - Goldacres G6 Crop Cruiser 2 Series Operator's Manual

Air bag dump valve closed.
To Deflate Air Bags for Trailer Transport:
1 Load and park the Cruiser on transport
platform.
2 Open the drain valve on the air tank and
let the air empty out.
3 Open the air dump valves:
• One on LHS of the front airbag
• One on each rear airbag.
4 The air bags will lower on to the bump
stops.
5 Once the Cruiser is on the bump stops,
close the air tank dump valves.
GA8701177 REV 2 APRIL 2022
Air bag ride height measurement & shock absorber (right).

Shock Absorbers

Four shock absorbers are fitted to the Cruiser,
one fitted to each side of the front and rear
axles. The shockers absorbers dampen
movement of the air bags & prevent recoil.
Shockers absorbers should be regularly
checked for damaged rubbers or oil leaks.
Refer to the specification provided in the
'Maintenance Schedules' of this chapter.
Lubrication & Maintenance – Service
Air Conditioner Compressor.
Air Conditioner
Compressor Belt
The Air Conditioner Compressor Belt requires
manual adjustment. Check the belt regularly.
A deflection of no more than 12mm is present
in the belt when it is tensioned correctly.
The belt should be replaced at minimum every
1000 hours.
Refer to the specification provided in the
'Maintenance Schedules' of this chapter.
To Tension the Compressor Belt:
1 Loosen the compressor mounting &
adjuster bolts
2 Use the lock nuts on the adjuster to pivot
the compressor and pull the belt tight.
3 When the belt is correctly tensioned,
tighten the mounting and adjustor bolts.
Use the lock nuts on the adjuster to pivot the compressor
and tension the belt.
To Replace the Compressor Belt:
1 Loosen the compressor mounting &
adjuster bolts
2 Remove the old belt.
3 Fit a new belt.
4 Use the lock nuts on the adjuster to pivot
the compressor and tension the belt.
5 When the belt is correctly tensioned,
tighten the mounting and adjuster bolts.
Air Conditioner condenser.
8
207