Goldacres G6 Crop Cruiser 2 Series Operator's Manual page 169

Hide thumbs Also See for G6 Crop Cruiser 2 Series:
Table of Contents

Advertisement

Press the 'Tilt RH (mV)' & 'Tilt LH (mV)' set touch buttons & a new value appears
in each display.
18 Press the Set touch button of the 'Tilt RH (mV)' and the
Set touch button of the 'Tilt LH (mV)' and new set values
appear in the 'Tilt RH (mV)' and 'Tilt LH (mV)' displays.
19 Press & hold down the IN end of the Boom Fold rocker
switch to fold-in the boom until both boom ends fully closed
over the boom rests, then release the switch.
20 Press & hold the 'Boom Lower' push button on the Joystick to
lower the boom onto the Boom Rests, then release the switch.
Press & hold the 'Boom Lower' push button on the Joystick to
further lower the rear of the boom and put sufficient weight on the
Boom Rests to stabilise the boom, then release the switch.
Press & hold the 'Boom Lower' push button to lower the boom onto the boom
rests, then lower the boom further to stabilise its weight on the rests.
GA8701177 REV 2 APRIL 2022
Press the 'Transport Limit (mA)' set touch button & a new value appears the
display.
21 Press the Set touch button of the 'Transport Limit (mA)'
and a new set value appears in the 'Transport Limit (mA)'
display.
22 Press the SAVE touch button on the left hand side of
the screen to save the boom calibration settings into the
G-Hub.
If you don't press SAVE, the boom calibration settings will
be lost.
The boom calibration procedure for the G-Hub is now
completed.
Press the SAVE touch button to save the boom calibrations settings.
Boom Settings – Service
The left hand side Boom catch lowered.
23 Now check the Automatic Folding of the boom to ensure
it operates correctly. If it is not operating correctly, seek
qualified help to diagnose the problem, then re-calibrate.
24 On completion of folding the boom to transport position,
press & hold down the 'Boom Rest' IN switch to lock down
the left hand side Boom Rest for road travel.
Press & hold the Boom Rest IN switch to lock down the LHS boom lock, then
press the Boom Fold IN switch momentarily to tighten the boom into its rests.
7
169

Advertisement

Table of Contents
loading

Table of Contents