Goldacres G6 Crop Cruiser 2 Series Operator's Manual page 220

Fast Tracking Problems – Trouble Shooting
9
(B)
Press the Virtual Mode touch button {A} to engage Virtual Mode, then press the
relevant switch to test its function (eg, {B} Boom Lift).
To Check a Function in Virtual Mode:
1 Press the Virtual Mode touch button to engage/disengage
the Virtual Mode.
The touch button displays Green when engaged & Grey
when disengaged.
2 Press the relevant screen switch (of the left 2 columns of
the screen) to test its function (eg, Boom Lift).
If working the boom will raise while the switch is being
pressed and stop when the switch is released.
3 When testing is completed, press the Virtual Mode touch
button to disengage Virtual Mode.
The touch button displays Grey when disgaged & Green
when engaged.
The G-Motion Position display gives a digital reading within a range of 60 -112
when the Joystick is moved forwards and backwards.
220
(A)
Press the 'Console' tab touch button to display the screen - this screen is used
to check Console switch functions & operate Console switch functions in Virtual
iii) Console
Press the Console tab touch button to display the Console
screen
The Console display screen provides two testing functions:
• To check the function of each switch along the top of
the screen/switch panel
• To operate switches in Virtual Mode
In Virtual mode, top of the screen switches are disabled
In Virtual Mode the top of the screen switches can be
used to operate the various functions
This can be useful if any switches fail. For example, the
boom can be folded and the Cruiser moved temporarily.
Variations in the illustative screens shown above occur because they are from
different Cruiser models:
• The 'Fold Stage 3' switch only appears with 48m booms.
• The 'Fold Diff Lock' switch only appears with 4WD Cruisers.
Press a Console push button (eg, Boom Rest In), then its corresponding switch
on the Console screen will light up Green, if functioning correctly.
To Check the Function of Each Switch:
1 While in the Console Diagnostic screen, press the relevant
push button on the console push button panel:
• If a push button or rocker switch is working, its
corresponding touch button on the Console Diagnostic
screen will light up Green each time the push button or
rocker switch is pressed.
• If a push button or rocker switch is not working, its
corresponding touch button on the Console Diagnostic
screen will not light up.
2 If a touch button on the Console Diagnostic screen does
not light up, then locate the Console Control Module
(shown above right) and check that connectors are fitting
correctly.
The Park Brake cannot be activated/deactivated in Virtual Mode.
GA8701177 REV 2 APRIL 2022