Identification & Parts Ordering; Wheels & Tyres - Goldacres G6 Crop Cruiser 2 Series Operator's Manual

Foreword - Important Information Foreword - Important Information
1 1
The serial number plate located on the chassis at the front
left hand side by the cabin access ladder.
Identification & Parts
Ordering
When ordering parts or requesting service
information for your sprayer it is important to
quote the serial number of your machine in
order to receive accurate information.
The serial number plate on your machine is
located on the chassis at the front left hand
side by the cabin access ladder.
When ordering parts from your Goldacres
dealer, please quote:
• Machine serial number
• Part number required
• Part description
• Quantity required.
To identify the exact options fitted to your particular
sprayer, refer to the original quotation and/or build sheet.
If needed, a copy of the build sheet may be obtained by
contacting your dealer and quoting your machine serial
number as described above.
8
The Goldacres Parts Manual (available online)
includes the relevant information you need
when ordering parts from your dealer.
When returning parts to a Goldacres dealer for
service or repair, all parts MUST be cleaned
thoroughly before sending them.
Dealers will not expose their service
technicians to the many potentially hazardous
pesticides & substances that may have been
used.
Use only Genuine Goldacres parts on
Goldacres equipment.
Please ensure all parts are clearly labelled with the owner's
details and a brief description of the fault.
Dealers are not liable for the return of any goods to a
Goldacres Dealer. Goods must be returned to point of
sale.
Tyre Size Load Index
480/80R46 166A8/159D
480/80R50 177A8/166D
173A8/169D
520/80R46
The Crop Cruiser G6 Series 2 has three tyre options.
Wheels & Tyres
Tyre pressures need to be checked regularly
- check every 8 to 12 hours of operation.
There are many factors concerning the
appropriate tyre pressure for a particular tyre
and load. The many factors include:
• Tyre size,
• Rim type,
• Tyre status (driven or free rolling),
• Load,
• Speed,
• Haul length and
• Load Indiex.
All factors need to be considered when
determining the tyre pressure.
If a tyre is replaced with a different brand or size, please
contact the supplier for correct air pressures to suit the
load carrying capacity of this machine.
Recommended Pressures @
30km/hr 50km/hr
(kPa/PSI) (kPa/PSI)
240 / 35 283 / 41
220 / 32 240 / 35
220 / 32 180 / 26
For information on wheel maintenance
please refer to Chapter 8 "Lubrication &
Maintenance".
Converting Kilopascals (Kpa) to Pounds per Square Inch
(PSI):
PSI = Kpa x 0.145
Eg. 282 Kpa x 0.145 = 40.9 PSI
GA8701177 REV 2 APRIL 2022