Boom Master On/Off; Boom Lift/Lower - Goldacres G6 Crop Cruiser 2 Series Operator's Manual

Hide thumbs Also See for G6 Crop Cruiser 2 Series:
Table of Contents

Advertisement

Ready to Spray – Operation
6
Press & hold the R Arrow Up on the Boom Tilt push button
to tilt up the right hand boom end.
To Tilt Up the Right Hand Boom:
i)
Press & hold the R Arrow Up on the Boom
Tilt push button.
ii) Release the push button when the desired
tilt is acheived.
116
Press & hold the R Arrow Down on the Boom Tilt push
button to tilt down the right hand boom end.
To Tilt Down the Right Hand Boom:
i)
Press & hold the R Arrow Down on the
Boom Tilt push button.
ii) Release the push button when the desired
tilt is acheived.
Press the Boom Master push button to start boom spraying.
Press the Boom Master push button to stop boom spraying.

Boom Master On/Off

The yellow Boom Master On/Off push button
cycles the Boom Master switching boom
spraying On/Off.
To Switch On/Off the Boom Spraying:
i)
Press to Boom Master On/Off push button
to Start the boom spraying.
ii) Press to Boom Master On/Off push button
to Stop the boom spraying.
The pump must be running for nozzles to spray.
See page ? for instructions on engaging & disengaging
the pump.
Press & hold the Boom Lift push button to raise boom hieght.
Press & hold the Boom Lower push button to lower boom hieght.

Boom Lift/Lower

The Boom Lift/Lower push button sides are
used to raise or lower the vertical height of the
boom.
To Raise the Boom:
i)
Press & hold the Boom Lift on the push
button to raise the boom to its desired
level.
ii) Release the push button to hold the
desired boom level.
To Lower the Boom:
i)
Press & hold the Boom Lower on the push
button to lower the boom to its desired
level.
ii) Release the push button to hold the
desired boom level.
GA8701177 REV 2 APRIL 2022

Advertisement

Table of Contents
loading

Table of Contents